Chinese hot-rolled steel sheet piles SPU601, SPU602, and SPU603 are very popular in Europe and the Middle East. The support rope should be 1-inch Manila rope or equivalent, equipped with connectors to prevent the platform from sliding on the SPU601, and should be securely fastened to the overhead support. When a traffic barrier is set on top of an SPU602 MSE wall, the minimum wall height should be 6 feet (approximately 1.8 meters) and the minimum wall length should be 40 feet (approximately 12 meters). Standard concrete SPU 601 and SPU 603 panels are the equivalent size of two SPU 603 longitudinal beams and can be easily slid into place.

Larssen steel sheet piles SPU604, SPU605, and SPU606A should be worn with a full-body safety harness and attached to an independent static rope or structure that meets fall protection requirements, as determined by an SPU604 qualified individual. Contech Bin-Wall Type 2 utilizes reinforced concrete decking for an attractive appearance, high strength, flexibility, and durability. SPU 604 also costs less to construct than heavy reinforced concrete retaining walls.

Purpose: To prevent employee injuries when using ladders, stairs, or ramps to access elevated work areas. C. References: 29 CFR Subpart X, WAC 296-876, and the "Fall Protection" section of this manual, SPU606A. Employees using ladders should be trained by a qualified individual to recognize hazards and understand procedures to minimize them: proper construction, placement, care, use, and operation of ladders.

Specifications